Q7 Quattro V6-3.6L (BHK) (2007)
/Page-2161001.png)
Oil Pressure Sender: Service and Repair
Oil Pressure Switch
Removing
-
Disconnect electrical connector - 2 - on oil pressure switch (F1).
-
Remove oil pressure switch (F1) - 1 -.
Installing
‹› Tightening specifications => [ Oil Cooler and Left Engine Support with Oil Filter Housing, Assembly Overview ] See: Oil Cooler/Service and
Repair/Oil Cooler and Left Engine Support with Oil Filter Housing, Assembly Overview.
Installation is in reverse order of removal, note the following.
‹› Replace sealing ring.
