Q7 Quattro V6-3.6L (BHK) (2007)
Intake Manifold: Service and Repair
Intake Manifold, Assembly Overview
Intake Manifold, Assembly Overview
1
Bolt
‹› Tightening specification => [ Fuel Rail and Injectors, Assembly Overview ] See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Rail/Service and Repair/Fuel Rail and Injectors, Assembly Overview.
2
Fuel rail
‹› For cylinders 2, 4, 6
‹› Removing and installing => [ Fuel Rail and Injectors, for Cylinders 2, 4 and 6 ] See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Injector/Service and Repair/Fuel Rail and Injectors, for Cylinders 2, 4 and 6.
3
Bolt
‹› 8 Nm
4
O-ring
‹› Replace
5
Bolt
‹› 6 Nm