Q7 Quattro V6-3.6L (BHK) (2007)
/Page-2169004.png)
CAUTION!
Risk of damage when installing valve stem seals.
‹› Place plastic sleeve - A - that is attached to valve stem seals - B - on valve stem.
-
Lightly oil valve stem seal.
-
Slide valve shaft seal onto plastic sleeve.
-
Carefully press valve stem seal onto valve guide with valve stem seal drive (3365).
-
Remove plastic sleeve.
If valve keepers were removed from installation cartridge, they must next be inserted in valve keeper inserting tool (VAS 5161/18):
