Q7 Quattro V6-3.6L (BHK) (2007)
‹› If camshaft bar (T10068 A) does not engage, rotate crankshaft 1 rotation further in direction of engine rotation.
-
Camshaft position, checking:
Intake Side
‹› The "ARROW" - 1 - on intake camshaft adjuster must align with notch - 2 - on far right of control housing.
‹› A small offset between notch - 2 - and ARROW - 1 - is permitted.
‹› Ignore notch on camshaft adjuster.
Exhaust Side