Q7 Quattro V6-3.6L (BHK) (2007)
/Page-2407001.png)
Exhaust Manifold: Service and Repair
Exhaust Manifold
Exhaust Manifold
Removing
‹› During installation, all cable ties must be reinstalled at the same location.
-
Disconnect vacuum hose - 1 -.
-
Remove air guide pipe - arrows -.
-
Disconnect electrical connector - 1 - on throttle valve control module (J338).
-
Remove bolts - arrows - and remove throttle valve control module (J338).
Without Mechanical Vacuum Pump
-
Remove vacuum lines on intake manifold as follows:
