Q7 Quattro V6-3.6L (BHK) (2007)
-
Remove nuts - 1 to 4 - and remove right locking flange cover.
-
Disconnect electrical harness connector - 3 - at right locking flange.
CAUTION!
Risk of injury from fuel.
‹› To reduce residual pressure remaining in fuel system, lay a clean cloth around the connector and carefully loosen connector.
-
Disconnect fuel supply line - 2 - from right locking flange by pressing release button.
With Auxiliary Heater
-
Also disconnect fuel supply line to auxiliary heater metering pump by pressing release buttons.
Continuation for All
-
Remove locking ring with wrench (T10202).