Q7 Quattro V6-3.6L (BHK) (2007)
-
Lay aside right locking flange with auxiliary heater intake line connected.
‹› Ignore items - 1 to 4 -.
-
Grasp in fuel tank opening and remove fuel level sensor 1 (G) through guide - arrow 2 - while pressing locking tab - arrow 1 -.
‹› Fuel level sensor 1 (G) is shown without fuel tank to provide a better illustration.
Installing
‹› Tightening specifications => [ Fuel Delivery Unit and Fuel Level Sensor, Assembly Overview ] See: Powertrain Management/Fuel Delivery and
Air Induction/Fuel Pump/Service and Repair/Fuel Delivery Unit and Fuel Level Sensor, Assembly Overview.
Installation is in reverse order of removal, note the following:
‹› Replace seal.
-
Insert fuel level sensor 1 (G) into guide until it engages audibly.
-
Connect electrical connectors - 1 - and - 2 - on underside of right locking flange.