Q7 Quattro V6-3.6L (BHK) (2007)
5.
Update the Instrument Cluster Software using the SVM action code as listed in the table shown.
Note:
Do not use a 6017 or 6017A while flashing. Doing so may result in complete control module failure.
Tip: The SVM Process must be completed in its entirety so the database receives the update confirmation response. A warranty claim may not be
reimbursed if there is no confirmation response to support the claim.
or further SVM update instructions and troubleshooting, please refer to the SVM Operating Manual; Elsa Web TSB 2011732.
Warranty
Required Parts and Tools
The following Technical Service Bulletin will be necessary to complete this procedure:
^
2011732; Software Version Management (SVM) Operating Manual
All part and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Dept. and service manuals for