Q7 Quattro V6-3.6L (BHK) (2007)
‹› The new central locking -SAFE- indicator lamp (K133) must be connected with the door trim wiring harness.
-
Disconnect the electrical wire and connect it with the new electrical wire for the central locking -SAFE- indicator lamp (K133).
-
Slide the central locking LED in until it engages audibly.
-
Install front door trim.
Front Door Safety and Entry Lamp
Removing
-
Press retaining tab - 1 - in with a flat-head screwdriver and pry out door safety lamp or footwell light - 2 -.
-
Disconnect electrical connector - 3 -.
-
Release retaining clips - arrows - and remove cover - 1 - over bulb.
-
Remove bulb - 1 - (12V, 3 W) on back of door safety light/entry light from socket - 2 -.