Q7 Quattro V6-3.6L (BHK) (2007)
Fog/Driving Lamp: Service and Repair
Fog Lamp Bulb, Changing
Fog Lamp Bulb, Changing
Removing
-
Remove fog lamp.
-
Release retaining tabs - arrows - on cover cap - 1 -.
-
Disconnect electrical connectors - 1 - and - 2 - on bulb.
-
Disengage wire clamp - 3 - and remove bulb - 4 - from housing.
Installing
Install in reverse order, observing the following:
-
Insert new bulb (H7 - 12 V, 55 W) in housing, do not touch glass bulb with bare hand.
-
Secure bulb with spring clip.
-
Reconnect harness connectors and close housing cover.
-
Adjusting fog lamps 406.