Q7 Quattro V6-3.6L (BHK) (2007)
Headlamp Igniter Module: Service and Repair
Left Headlamp Power Output Stage J667 / Right Headlamp Power Output Stage J668, Removing And Installing
CAUTION: Always disconnect Ground (GND) wire before working on gas-discharge headlamp components marked with yellow high voltage
symbols.
Removing
-
Remove headlamp.
-
Turn housing cover - 1 - counterclockwise - arrow - and remove from headlamp housing.
-
Turn socket - arrow - counterclockwise and pull out of headlamp housing.
-
Release locking slide - 2 - in - direction of arrow - and remove housing cover - 1 - from headlamp housing.