Q7 Quattro V6-3.6L (BHK) (2007)
Headlamp Switch: Service and Repair
Light Switch, Removing And Installing
Removing
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Turn light switch to "0" position.
-
Use screwdriver to pry off cover on left of instrument panel - arrow -.
-
If present, remove screw - 1 - and remove air duct - 2 -.
-
Reach through opening over side instrument panel vent and press light switch - 1 - out of instrument panel - arrow -.
-
Disconnect connector.
Installing
Install in reverse order, observing the following:
-
Press switch into instrument panel until lock mechanism engages.
Tightening torque
Air duct to air channel: 1.4 Nm