Q7 Quattro V6-3.6L (BHK) (2007)
Install in reverse order of removal, observing the following:
‹› Wiring grommets - 2 - are seated correctly in their mount - 3 -.
‹› Self-adhesive seal - 1 - between rear lid and rear light housing must seal correctly.
-
Tighten rear light retaining nuts in - 1, 2, 3 - sequence.
-
Place the cap - 1 - on the rear flap - 2 -, when doing this the mount - 3 - must fit into the notch in the body - arrow -.