Q7 Quattro V6-3.6L (BHK) (2007)
-
Allow cover cap to hang.
-
Remove screw - 3 - with a screwdriver - 1 -.
-
Remove rear lights - 2 - from bumper cover.
-
Disconnect electrical connector on central connector.
-
Turn socket - arrow - counterclockwise and remove from rear light housing.
-
Remove bulb from socket.
Installing
Install in reverse order of removal, observing the following:
-
Insert new bulb into socket, do not touch glass cone with bare hands when doing so.
-
Secure socket by turning clockwise.
-
Tighten screw.
-
Press cover cap into bumper cover until it engages audibly.
Tightening Specifications