Q7 Quattro V6-3.6L (BHK) (2007)
/Page-9136008.png)
-
Do not press brake pedal.
-
Remove rear lid upper trim.
-
Remove roof spoiler.
-
Remove screws - 2, 3 and 4 -.
-
Carefully press both outer retaining points on retaining springs together - A arrows - and slide high-mounted brake light - 1 - off roof spoiler -
arrow B -.
‹› Entire high-mounted brake light must be replaced in the event of faulty LEDs.
Installing
Install in reverse order of removal, observing the following:
-
Install roof spoiler.
-
Install rear lid upper trim.
