Q7 Quattro V6-3.6L (BHK) (2007)
Turn Signal Bulb: Service and Repair
Turn Signal Bulb
-
Switch off ignition and remove ignition key.
-
Removing Turn light switch into "0" position.
Vehicles without S-line equipment:
-
Remove air intake grille - 1 - in upper part of bumper cover - arrow -.
Vehicles with S-line equipment:
-
Remove the brace - 1 - for the air inlet grille from the bumper cover in the sequence shown - arrows A through D -.
-
Disengage the air inlet grille - 2 - at the spot identified with - arrow E -, move it the side and remove it from the upper part of the bumper cover.
All Vehicles