Q7 Quattro V6-3.6L (BHK) (2007)
/Page-1741005.png)
-
Now using the laser beam - 3 - on the (VAS 6430), check if the laser beam contacts sensor lens.
‹› If the laser beam still meets the sensor lens at this step after adjusting the same individual toe values, the (VAS 6430) is aligned correctly
(positioned).
‹› If the laser beam does not meet the sensor lens, (VAS 6430) alignment must be performed again.
-
Connect (VAS 5051/B).
-
Connect (VAS 5051/5A) to diagnostic connector.
