Q7 Quattro V6-3.6L (BHK) (2007)
-
Remove bolt - 1 - and remove front coolant pipe from fan shroud.
‹› Ignore hose clamps (3093).
Installing
‹› Tightening specifications => [ Coolant Pipes, Assembly Overview ] See: Coolant Pipes, Assembly Overview.
Installation is in reverse order of removal, note the following:
-
Fill with coolant => [ Filling ] See: Engine, Cooling and Exhaust/Cooling System/Service and Repair.
-
On a vehicle with air suspension, deactivate vehicle lift mode.