Q7 Quattro V6-3.6L (BHK) (2007)
Tire Pressure Module: Service and Repair
Tire Pressure Monitoring Control Module, Removing and Installing
Tire Pressure Monitoring Control Module, Removing and Installing
Removing
If control module is replaced, read out coding before removal using Guided Fault Finding in "Replace Control Module" function.
-
Remove the upper instrument panel cover on the driver side (knee bar).
-
Unclip control module - 1 -.
-
Disconnect connector and remove control module.
Installing
Installation is performed in the reverse order of removal.
-
If tire pressure monitoring control module is replaced, system must be coded. Refer to => [ Tire Pressure Monitoring System Usage ] See: Tire
Monitoring System/Description and Operation/Tire Pressure Monitoring System Usage.