Q7 Quattro V6-3.6L (BHK) (2007)
/Page-1961001.png)
Tire Pressure Sensor: Service and Repair
Metal Valve Body
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1410)
-
Place metal valve with rubber seal through rim from inside.
-
Position beveled washer and union nut from outside and tighten.
-
Secure against turning with counterhold - 1 - (e.g. drill bit dia. 2 mm).
-
Press the tire pressure sensor - 1 - into bed and fasten at rear of valve with microencapsulated screw.
