Q7 Quattro V6-3.6L (BHK) (2007)
Fuse Block: Service and Repair
Center Instrument Panel
Center Instrument Panel
Removing
-
With ignition switched off, disconnect battery Ground (GND) wire. Refer to => [ Battery Disconnecting and Reconnecting ] See: Starting and
Charging/Battery/Service and Repair/Removal and Replacement/Battery Disconnecting and Reconnecting.
-
Remove driver's side upper instrument panel cover.
-
Release retaining clip - arrow - and press fuse holder - 1 - back out of relay and fuse carrier.
-
Remove fuses from fuse holder.
-
Release retaining clips - arrows - and remove cover from fuse holder.
-
Remove connector retaining strip - 1 - - arrow - and remove connectors from plug-in socket.