Q7 Quattro V6-3.6L (BHK) (2007)
Power Distribution Module: Service and Repair
Vehicle Electrical System Control Module 2
Vehicle Electrical System Control Module 2
-
If the control module was replaced, select the " Replace" function for the respective control module in "Guided Fault Finding" or "Guided
Functions".
-
Select the function or path:
-
Follow further instructions on display of (VAS 5051B).
Removing
-
If control module is replaced, select "Guided Functions" of respective control module.
-
Switch off ignition and remove ignition key.
-
Remove front passenger's seat.
-
Open drawer - 1 - under passenger's seat console.
-
Release retaining clamps on back side of cover - 2 - in - direction of arrow A -.
-
Then remove cover in - direction of arrow B - from passenger's seat console.
-
Remove bolt - 4 -.