Q7 Quattro V6-3.6L (BHK) (2007)
Electronic Throttle Control Module: Service and Repair
Throttle Valve Control Module J338, Removing And Installing
Removing
-
Disconnect vacuum hose -1 -.
-
Remove air guide pipe - arrows -.
-
Disconnect electrical connector -1 - on Throttle Valve Control Module J338.
-
Remove bolts - arrows - and remove Throttle Valve Control Module J338.
Installing
-
Tightening torque.
Installation is in reverse order of removal, note the following:
NOTE: Replace O-ring.