Q7 Quattro V6-3.6L (BHK) (2007)
Throttle Position Sensor: Service and Repair
Kick-down Function, Adapting After Replacing Gas Pedal Module Or Engine Control Module (ECM)
NOTE: If the throttle position sensor or engine control module is replaced in vehicles with automatic transmission, the kick-down function must be
adapted.
Special tools, testers and auxiliary items required
-
Vehicle Diagnosis, Testing and Information System VAS 5051B with Diagnostic Cable VAS5051/5A
Work procedure
-
Vehicle Diagnosis, Testing and Information System VAS 5051B connected to Data Link Connector (DLC) - arrow -.
-
Engine not running, ignition switched on.
-
No faults in DTC memory.
Display on VAS 5051B:
-
Tap Vehicle Self-Diagnosis button -1 - in selection.