Q7 Quattro V6-3.6L (BHK) (2007)
‹› Ignore - 1 -.
-
Connect fuel injection pressure gauge (V.A.G 1318) with adapter (V.A.G 1318/11) and (V.A.G 1318/12) in the fuel line.
-
Connect assisting hose - arrow - on Pressure gauge and hold in a measuring container.
‹› The lever points in direction of flow.
-
Bleed fuel system by briefly pressing remote control.
-
Close pressure gauge shut off valve.
‹› Lever stands perpendicular to direction of flow - arrow -.
-
Press remote control switch until pressure no longer climbs on pressure gauge.
‹› Specified value: approximately 6 bar positive pressure
-
If specified value is not reached, check fuel pump delivery quantity. Refer to => Fuel Delivery and Air Induction.See:
Checking Residual Pressure
-
Check for leaks and residual pressure by observing pressure drop on gauge.
‹› After 10 minutes there must be a residual pressure of at least 3.75 bar.
If residual pressure drops below 3.75 bar: