Q7 Quattro V6-3.6L (BHK) (2007)
‹› Fuel injector electrical connector must engage in cut out in cylinder head.
-
Press fuel rail evenly onto fuel injectors.
-
Tighten fuel rail bolts and fuel line union nuts by hand.
-
Tighten fuel rail bolts from inside to outside.
-
Tighten fuel line union nuts.
The rest of installation is in reverse order of removal, note the following:
-
Install intake manifold => [ Intake Manifold ] See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Intake Manifold.
-
Install fuel rail for fuel injectors for cylinders 2, 4, 6 => [ Fuel Rail and Injectors, for Cylinders 2, 4 and 6 ] See: Fuel Injector/Service and
Repair/Fuel Rail and Injectors, for Cylinders 2, 4 and 6.
-
Install small left coolant pipe.
-
Install oil dipstick guide tube. Refer to => Engine See: Engine, Cooling and Exhaust/Engine
-
Fill with coolant.