Q7 Quattro V6-3.6L (BHK) (2007)
-
To engine
-
To disconnect, press release button on connection piece
-
Clipped in on fuel tank
11
-
Electrical harness connector
-
For Fuel Level Sensor 2 G169
12
-
Vent line
-
To disconnect, press release button on connection piece
13
-
Locking ring
-
Use wrench T10202 for removal and installation
Tighten to 110 Nm
14
-
Seal
-
Replace
-
Install dry
15
-
Left locking flange
-
With gravity valve and fuel filter housing
-
Installed location
-
Fuel filter, removing and installing
16
-
Fuel line
-
To fuel pressure regulator at right locking flange
-
To disconnect, press release button on connection piece
17
-
Fuel line
-
From Fuel Pump (FP)
-
To disconnect, press release button on connection piece
18
-
Fuel Level Sensor 2 G169
-
Clipped in at retaining ring -19 -
-
Resistance values, checking
19
-
Retaining ring
-
Welded to fuel tank
-
For suction jet pump and Fuel Level Sensor 2 G169
20
-
Rear suction jet pump
Locking flange cover
-
Tighten bolts -1 through 4 - to 9 Nm.