Q7 Quattro V6-3.6L (BHK) (2007)
-
Fold carpet cut-out to side - arrow -.
-
Remove nuts -1 to 4 - and remove right locking flange cover.
-
Disconnect electrical harness connector - 3 - at right locking flange.
CAUTION:
Risk of injury from fuel.
-
To reduce residual pressure remaining in fuel system, lay a clean cloth around the connector and carefully loosen connector.
-
Disconnect fuel supply line - 2 - from right locking flange by pressing release button.
Vehicles with auxiliary heater:
-
Also disconnect fuel supply line to auxiliary heater metering pump by pressing release buttons.
All:
-
Remove locking ring with wrench T10202.