Q7 Quattro V6-3.6L (BHK) (2007)
Navigation Module: Service and Repair
Removing And Installing
Navigation System With CD Drive Control Module J401 (MMI), Removing And Installing
Special tools, testers and auxiliary items required
-
Radio Removal Tool T10057
-
Protective Cap For Cable Connector VAS6223/9
Navigation System with CD Drive Control Module J401 is located in luggage compartment beneath the flap on the right
CAUTION:
-
Switch off all electrical consumers.
-
Switch off ignition and remove ignition key.
-
If control module is replaced, select the function "Replace" of respective control module in "Guided Fault Finding".
Use Vehicle Diagnosis, Testing and Information System VAS5051/5052 to do so.
Removing
-
Remove floor panel and recess in luggage compartment.
-
Insert two hooks of Radio Removal Tool T10057 into the front of Navigation System with CD Drive Control Module J401.