Q7 Quattro V6-3.6L (BHK) (2007)
/Page-189002.png)
-
Remove right luggage compartment trim.
-
Remove luggage compartment floor support - 1 - upward - arrows -.
All:
-
Release retaining clips - arrows A - and remove Comfort System Central Control Module 2 (J773) - item 1 - from mount.
-
Release securing clip - 2 - on connector in - direction of arrow B -.
-
Disconnect electrical connector.
Installing
Installation is reverse of removal, but note the following:
-
Secure electrical connector with securing clip.
-
Install luggage compartment side trim.
