Q7 Quattro V6-3.6L (BHK) (2007)
Variable Induction Control Module: Service and Repair
Throttle Valve Control Module
Removing
-
Disconnect vacuum hose - 1 -.
-
Remove air guide pipe - arrows -.
-
Disconnect electrical connector - 1 - on throttle valve control module (J338).
-
Remove bolts - arrows - and remove throttle valve control module (J338).
Installing
‹› Tightening specifications => [ Intake Manifold, Assembly Overview ] See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and
Repair/Intake Manifold.
Installation is in reverse order of removal, note the following:
‹› Replace O-ring.