Q7 Quattro V6-3.6L (BHK) (2007)
Charging System Control Module: Service and Repair
Energy Management Control Module, through 05.2008
Special tools, testers and auxiliary items required
‹› Pry lever (80 - 200)
Removing
‹› While removing and installing, no charger must be connected.
-
If the control module was replaced, select the "Replace" function for the respective control module.
-
Select the function or path:
-
Follow further instructions on display of (VAS 5051B).
-
Remove driver's seat.
-
Switch off ignition and remove ignition key.
-
Remove screw - 2 - and pull floor vent - 1 - up.
-
Release retaining clamps on back side of cover - 1 - in - direction of arrow A -.