Q7 Quattro V6-3.6L (BHK) (2007)
Tire Pressure Module: Service and Repair
Tire Pressure Monitoring Control Module 2
Tire Pressure Monitoring Control Module 2
Special tools, testers and auxiliary items required
‹› Vehicle diagnosis, testing and information system (VAS 5051 B)
Removing
Installed location on a LHD vehicle: on the left side next to the steering column.
Installed location on a RHD vehicle: on the right side next to the steering column.
If control module is replaced, read out coding before removal using Guided Fault Finding in "Replace Control Module" function.
-
Remove the upper instrument panel cover on the driver side (knee bar).
-
Remove the Tire Pressure Monitoring Control Module 2 (J793) - 1 -.
-
Disconnect connector and remove control module.
Installing
Installation is the reverse of removal, with special attention to the following:
-
If tire pressure monitoring control module 2 is replaced, system must be recoded.
-
Connect (VAS 5051 B) and select the control module in "Guided Functions".