Q7 Quattro V6-3.6L (BHK) (2007)
Air Bag: Removal and Replacement
Replacing Connection on Airbag Unit
Replacing Connection On Airbag Unit
CAUTION:
-
Observe safety precautions for work on airbags.
-
Before handling airbag units (e.g. disconnecting electrical connector), the person handling it must "electrostatically discharge". This can
be done by touching door striker, for example.
Removing
-
Remove driver-side airbag unit.
-
Disconnect electrical connections - 2 - and - 3 - on airbag with screwdriver - 1 -.
Installing
CAUTION:
-
Observe safety precautions for work on airbags.
-
Before handling airbag units (e.g. disconnecting electrical connector), the person handling it must "electrostatically discharge". This can
be done by touching door striker, for example.
Installation is reverse of removal. Observe the following when doing so:
-
Install driver-side airbag unit.