Q7 Quattro V6-3.6L (BHK) (2007)
-
Remove passenger side airbag unit. Refer to => [ Passenger Airbag Unit ].
-
Remove nuts - arrows -.
-
Disengage bracket - 1 - and - 2 - at airbag unit guide and remove bracket from instrument panel central tube.
Installation
Installation is in reverse order of removal, noting the following:
-
Install passenger side airbag unit. Refer to => [ Passenger Airbag Unit ].
‹› Tightening specifications, refer to => [ Passenger Airbag Component Overview ] See: Description and Operation/Passenger Airbag.
Front Passenger Airbag Disabled Indicator Lamp
Removing
-
Remove center instrument panel vent. Refer to => [ Center Instrument Panel Vent ] See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair.
-
Slide switch strip - 1 - out of decorative trim with instrument panel vent - arrow -.
‹› If Front Passenger's Airbag Disabled Indicator Lamp (K145) LED is faulty switch strip in center instrument panel vent must be completely
replaced.
Installation