Q7 Quattro V6-3.6L (BHK) (2007)
/Page-6190001.png)
Seat Occupant Sensor: Service Precautions
Passive Occupant Detection Sensor Additional Safety Precautions
Passive Occupant Detection Sensor Additional Safety Precautions
CAUTION!
‹›
After each repair to the passenger seat where the seat or backrest cover was remove, a basic setting of the seat occupied recognition
control module must be performed.
‹›
Do not bend the passenger occupant detection system mat.
‹›
A leaking mat must be replaced (service kit).
‹›
Do not bend the passenger occupant detection system pressure hose.
‹›
Make sure the components of the seat occupied recognition system do not fall onto hard surfaces, do not come into contact with grease
and do not risk damage by resting against sharp objects.
‹›
The mat, the crease and various covers must be fitted to be free of folds.
‹›
Ensure the seat upholstery and cover are positioned correctly when installing.
‹›
Replace all cover clips or clips and make sure they are positioned correctly on the seat.
‹›
The system basic setting can be performed at temperatures between 0 °C and 40 °C with 8.R and 9.* airbags. The temperature must
be between 5° and 35°C with 10.* airbags.
‹›
Make sure that no objects are placed on seat when performing basic setting.
‹›
The use of additional seat cushions such as pillows impairs the function of the seat occupant detection system and the operation of the
airbag system.
