Q7 Quattro V6-3.6L (BHK) (2007)
Seat Belt: Service and Repair
Outer 2ND Row Three-Point Seat Belt, Removing and Installing
Outer 2nd Row Three-point Seat Belt, Removing And Installing
CAUTION: Follow safety precautions for working with pyrotechnic belt tensioners.
Removing
-
Switch off ignition.
-
Disconnect battery ground wire.
Vehicles with fixed second row
-
Remove corresponding second row seat.
-
Seat beach (two-thirds bench).
-
Individual seat.
Vehicles with fore and aft adjustable second row
-
Move second row seat forward on side to be removed.
Procedure for all vehicles
-
Remove wheel housing liner - 2 - by removing screw - 1 - for belt webbing - 3 - from body.
-
Remove C-pillar trim.
Vehicles with air duct in C-pillar
-
Remove screw - arrow - at belt guide.
-
Remove air duct - A -.
Vehicles with pyrotechnic belt tensioners
CAUTION: Before handling belt tensioner units (e.g. disconnecting electrical connector), the person handling it must "electrostatically
discharge". This can be done by touching door striker, for example.