Q7 Quattro V6-3.6L (BHK) (2007)
‹› Removing and Installing, refer to => [ Front Belt Guide ] See: Service and Repair/Seat Belts
6
Seat belt height adjuster
‹› Function test => [ When checking function, following conditions
must be fulfilled: ] See: Service and Repair/Seat Belts
7
Bolt
‹› 21 Nm
‹› If seat belt height adjuster is being removed for accident repairs, replace screw
8
Belt relay
‹› Belt relay must swing by itself in carrier direction after tightening screw.
9
Bolt
‹› 55 Nm
‹› If belt relay is being removed for accident repairs, replace screw
‹› Belt relay must swing by itself in carrier direction after tightening screw.
10
B-pillar trim
11
Belt height adjustment slide
12
Belt webbing
13
Belt anchor
‹› Removing and Installing, refer to => [ Belt Anchor ] See: Service and Repair/Seat Belts
14
Expanding rivet
‹› Qty. 3
15
Air duct
‹› Assignment.