Q7 Quattro V6-3.6L (BHK) (2007)
Steering Mounted Controls Assembly: Service and Repair
Multi-Function Buttons, Removing and Installing
Multi-function Buttons, Removing And Installing
CAUTION:
-
Switch off all electrical consumers.
-
Switch off ignition and remove ignition key.
Removing
-
Removing drivers airbag.
-
Disconnect trim ring from steering wheel.
-
Disconnect harness connector - 1 - at button - 2 -.
-
Slide button - 2 - out of steering wheel in - direction of arrow -.
-
Turn button around.
-
Disconnect harness connector - 2 - to Tiptronic switch from multi-function button - 1 - and remove button.
Installing
-
Install in reverse order.
Removal and installation of left multi-function button is identical.