Q7 Quattro V6-3.6L (BHK) (2007)
![background image](/audi/q7_quattro/v6-3.6l_(bhk)/Page-1162002.png)
Wires/Circuits entering/leaving the diagram in a horizontal direction will pick up again on the previous/next diagram in the series.
However, wires/circuits traveling the diagram in a vertical direction are following the tracks, and when they enter/leave a diagram they could be skipping
numerous diagrams in the series before picking up again on the destination diagram. When these wires/circuits enter or leave a diagram, the track
number of the diagram they came from/go to will be shown within a continuation reference frame/box.
HOW DO I NAVIGATE THE DIAGRAMS VIA THE TRACK NUMBERS?
Track 1-14
Assume you are tracing the wire/circuit identified by its size and color as 2,5 sw/ro on the diagram named Track 1-14.
This wire/circuit is running on track 8 of the diagram and terminates at the box labeled 175. To continue tracing this wire/circuit, you must now go to
Track 175, which is located within the diagram named Track 169-182.
But before going to the diagram named Track 169-182, again make note of the current track that you are leaving, which is Track 8.
Track 169-182
After arriving at the diagram named Track 169-182, locate track 175 at the bottom of the diagram.
Follow the imaginary track 175 grid line toward the top of the diagram looking for a box labeled 8 (the track you are coming from).
When you locate the box labeled 8, you have picked up the continuation of wire/circuit 2,5 sw/ro and can continue to trace it until it terminates at either