Q7 Quattro V6-3.6L (BHK) (2007)
Alignment: Service and Repair
Front Axle Toe Angle, Checking and Adjusting
Front Axle Toe Angle, Checking and Adjusting
-
Loosen lock nut - A -.
-
Adjust toe on left and right-hand wheels with hex - B -.
Be sure that boot is not twisted after turning tie rods.
Twisted boots wear out quickly.
-
Tighten lock nut - A -, and check toe-in again.
After tightening lock nut - A - it is possible that the value deviates slightly.
If the measured toe nevertheless lies within the tolerance, the adjustment is correct.