Q7 Quattro V6-3.6L (BHK) (2007)
/Page-4802005.png)
-
Now using laser beam - 3 - on (VAS 6190), check whether laser beam contacts sensor lens.
‹› If the laser beam still meets the sensor lens at this step after adjusting the same individual toe values, the (VAS 6190) is aligned correctly
(positioned).
‹› If the laser beam does not meet the sensor lens, (VAS 6190) alignment must be performed again.
-
Connect (VAS 5051 B).
-
Connect (VAS 5051/5A) to diagnostic connector.