Q7 Quattro V6-3.6L (BHK) (2007)
/Page-4803007.png)
-
"J428 - Distance regulation calibration".
Now follow instructions on screen to perform adjustment.
-
Use the upper screw - 1 - and lower screw - 2 - for precision adjustment in "Guided Fault Finding".
CAUTION!
The ACC adjustment is only accepted if "actuator test ended " is displayed in (VAS 5051/B).
-
Switch ignition off.
-
Disconnect (VAS 5051/5A) connector from diagnostic connection.
-
Disconnect battery charger.
-
Install license plate holder. Refer to => Bumper See: Body and Frame/Bumper
