Q7 Quattro V6-3.6L (BHK) (2007)
-
Adjust steering wheel downward and to rear as far as possible, use entire adjustment range of steering column adjustment for this.
-
Remove airbag unit.
-
Remove steering wheel.
-
Remove gap cover - 1 - in - direction of arrow -.
-
Remove screws - 4 - with T8 Screwdriver (T40056 A).
-
If present, remove screws - 6 - and remove handle trim - 5 - on mechanical steering column adjustment handle.
-
Remove screws - 7 -.
-
Separate top trim - 2 - for steering column switches from bottom trim - 3 - and remove both parts.
-
If installed, disconnect electrical harness connector at lower trim.
-
Remove bolt - 2 -.