Q7 Quattro V6-3.6L (BHK) (2007)
‹› Always replace after removal.
18
Bracket
19
Bolt, 20 Nm
20
Upper Control Arm
‹› Conical pin must be free of grease and oil.
‹› If necessary, clean using dry rag, do not use cleaning agents.
21
Bracket
22
Bolt, 9 Nm
23
Drive Axle
24
Bolt
25
Bolt
‹› M10: 50 Nm + 90°
‹› M12: 90 Nm + 90°
‹› Always replace after removal.
26
Backing Plate
27
Suspension Strut
28
Stabilizer
29
Nut, 110 Nm
‹› Self-locking
‹› Always replace after removal.
30
Subframe
Avoid contaminating with dirt and damaging the seal when setting down/storing.