Q7 Quattro V6-3.6L (BHK) (2007)
-
Install Wheel housing liner.
-
Install wheel and tighten.
-
On vehicles with air suspension, position vehicle on wheels. Refer to => [ Positioning Vehicle on Hoist and Wheels ] See: Service and
Repair/Procedures/Positioning Vehicle on Hoist and Wheels.
-
Perform vehicle alignment. Refer to => [ Work Procedure, Vehicle Alignment Overview ] See: Alignment/Service and Repair/Work Procedure,
Vehicle Alignment Overview.
Checking and aligning front/rear axle must take place on a VW/Audi recommended alignment stand.