Q7 Quattro V6-3.6L (BHK) (2007)
Control Arm: Service and Repair
Lower Control Arm, Level Control System Sensor, Upper Control Arms and Tie Rod Assembly
Overview
Lower Control Arm, Level Control System Sensor, Upper Control Arms and Tie Rod Assembly Overview
- Arrow A - points in direction of travel.
1
Expanding Rivet
2
Stone Protection Plate
3
Lower Control Arm
‹› Removal and installation, refer to => [ Lower Control Arm ] See: Lower Control Arm.
4
Subframe
‹› Removal and installation, refer to => [ Subframe ] See: Cross-Member/Rear Cross-Member/Service and Repair/Subframe.
5
Nut
‹› Self-locking
‹› Always replace after removal.
6
Bolt, 150 Nm + 90°
‹› Always replace after removal.