Q7 Quattro V6-3.6L (BHK) (2007)
/Page-5182003.png)
-
Support rear of subframe so that front screw from stabilizer bar bracket is located in center of (VAS 6131/13-2) - arrow -.
-
Mark position of crossmember on body using felt-tip pen.
-
Remove left and right bolts - arrows - from crossmember.
-
Secure subframe. Refer to => [ Subframe, Securing ] See: Subframe/Rear Subframe/Service and Repair.
-
Remove bolts - arrows - for subframe.
