Q7 Quattro V6-3.6L (BHK) (2007)
/Page-5189001.png)
Rear Knuckle Alignment Link: Procedures
Lower control arm, Level Control System Sensor, front upper link, rear upper link, tie rod, assembly overview
-
Arrow A - points in direction of travel.
1 - Expanding rivet
2 - Stone protection plate
3 - Lower control arm
4 - Subframe
5 - Self-locking nut
^
Always replace after removal
6 - Bolt
^
150 Nm plus an additional 1/4 (90°)
^
Always replace after removal
7 - Self-locking nut
^
90 Nm plus an additional 1/4 (90°)
^
Always replace after removal
8 - Bolt
^
Always replace after removal
9 - Bolt
^
Always replace after removal
10 - Self-locking nut
^
90 Nm plus an additional 1/4 (90°)
^
Always replace after removal
