Q7 Quattro V6-3.6L (BHK) (2007)
1. Press piece (T10301/5)
2. Support Ring (T10301/4). The chamfer on the exterior diameter must face toward the subframe.
3. Tube (T10301/3)
4. Hydraulic cylinder (VAS 6178)
5. Washer (T10205/4)
6. Nut (T10301/2)
7. Spindle (T10301/1)
CAUTION!
‹› Secure (VAS 6178) while pressing out.
‹› Bonded rubber bushing loosens abruptly. There is the risk of injuries by tools and bonded rubber bushing coming off!
-
Place (VAS 6208) underneath.
-
Press out bonded rubber bushing and collect escaping oil.
Bonded rubber bushing, pressing in